Bulk Bag Fillers

CMT provides a full range of bulk bag fillers for all applications.  Manual systems, Semi-Automatic and Fully Automated systems.  Volumetric and Gravimetric Bulk Bag Fillers.  From low capacity bulk bag fillers to automated bulk bag systems filling 70 bags per hour, we have a proven solution to meet your requirements.  The patented Cone Table Bulk Bag Filler is the single most effective component within the Bulk Bag filling system.

Bulk Bag Filler

Regardless of your required production rate the basic goals generally remain the same for a Bulk Bag Filler.

  General Customer Goals

  • Dust Free Filling
  • Produce a stable filled package that will not lean, tip or fall.
  • Accuracy - <+ 1- 3 lbs. typical
  • Ease of Use- Ergonomically correct design
  • Reliability
  • ROI – Payback when upgrading an existing system
Cone Table Bulk Bag Filler

Cone Table Bulk Bag Filler

72” Tall Bags, Crumb Rubber

Properly Filled Bags

Do your filled bulk bags look like this?

Poorly Filled Bulk Bags

They don’t have to!

Tall Filled Bulk Bag Nice Corner of Bulk Bag

Does Your Bulk Bag Filling Frame Look Like This?

Bulk Bag Filling Frame
  • Are your vibrators tearing up your bulk bag filler?
  • Re-welding?  Patching?
  • Replacing Load cells?

They don’t have to...

….Get Stable Filled Bulk Bags

Patented Cone Table -
The cone table is pyramidal in shape and lifts up approximately 18” to densify the bulk bag.  The cone forces material into the corners of the bulk bag, while vibrating the bulk bag directly. 

Densifying a pallet?  Why would you ever want to try to densify through a pallet?  Densify your bulk bag/product directly.
 

Bulk Bag Cone Table

Bulk Bag Cone Table

Cone Table Densification

The key component in filling any bulk bag properly is the densification system. 

Most competitors use a vibration or air system.  Both must vibrate through a pallet.  Mechanical failures – welds and load cells are common problems.

Control and Metering’s patented Bulk Bag Cone Table provides direct product densification without negative affects described above.

Test our Bulk Bag filler – there is nothing like it, anywhere!

Bulk Bag Cone Table

The Patented Bulk Bag Cone Table - Principle of Operation

Bulk Bag Cone Table Priciple of Operation

Vibrating Cone Table

Direct Contact with the bulk bag. No “thru pallet” densification

Pyramidal Bulk Bag Cone table forces material into the corners of the bulk bag when it actuates.

Both result in unparalleled filling – more material in smaller bulk bags and completely stable bulk bags.

Generally Mounted Independent of the Filling Frame.

Automatic Filling Systems

Control and Metering’s Cone Table Elite (CTE) bulk bag filler features an industry first dual load cell hang weighing system.  It’s robust, accurate and repeatable ensuring that bulk bags of any size can be filled with +/- 1-2 lb weighing accuracy at any speed.  This means you can reduce the overfill of your bulk bags and generate incremental revenue and profit as a result.

As always with Control and Metering equipment, the CTE bulk bag filler is a very robust machine.  Its new design incorporates fewer parts than ever before to provide unmatched reliability.  Control and Metering is the only manufacturer to offer a 2 YEAR WARRANTY!

The CTE Bulk Bag Filler features:

The patented Cone Table Densification system.

Hang Weighing - Results in extremely accurate, repeatable bulk bag weights.  The load cells are located in the upper frame, no longer susceptible to water and product build-up or operator “accidents”.

Bulk Bag Stretching - Since the bulk bag is suspended from its loops through much of the filling cycle the bulk bag fabric is stretched which greatly assists with producing a stable filled package. 

Net Weighing – Weighing only the bulk bag and product allow for lower rated load cell capacities, higher weight to noise ratios and better, more repeatable accuracies.  Accuracy to 0.10% are attainable.

CTE Bulk Bag Filler

CTE with cone table densification, hang weighing, automatic bulk bag removal.

Auto Height Adjustment – for each bulk bag size and each operator allowing all manipulation to occur at chest level, never above your head or within the bulk bag filling frame.

Auto Bulk Bag Hangers – Move forward to the operator to load the bulk bag, at chest level.  Never climb onto the fill station/roller conveyor again.

Fill Bulk Bags, Drums, Totes and Gaylords – All with the same machine.  Contact us to find out how.

Automated Bulk Bag Filling
Automated Bulk Bag Filler
  • Pallet Dispenser
  • Automatic Bulk Bag Height Compensation - PLC Controlled
  • Bulk Bag hanging arms extend to operator at operator’s actual height - PLC Controlled
  • Hang Weighing - Weighs bulk bag only
  • Hung Bulk Bag - Stretches bulk bag properly
  • Bulk Bag Cone Table - Densifies the bulk bag directly while forcing material into the corners of the bulk bag
  • Takeaway conveyor
Design Issues
  • Bulk Bag Cone Table Densification
  • Accuracy + 1-2 lbs.
  • Stable Filled Bulk Bags
  • More Product in Smaller Bulk Bags
  • Hang Weighing
  • Bulk Bag Stretching
  • Dual Load Cell System
  • Liner Retaining Ring
  • Automatic Bulk Bag Height Adjustment
  • Auto Loading Height Adjustment
Quote_Button1
 | Home  | Products  | Videos  | Photo Gallery  | Case Histories  | About Us  | Contact Us  | Request a Quote  | About Us
Social-media-icons BloggerIcon copy

Google+